Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS Uživatelský manuál

www.gefen.comfDVI to RGBSwith ScalerEXT-DVI-2-RGBSSUser Manual®

7OPERATING THE DVI TO RGBS WITH SCALERMAIN MENUThis portion of the manual will be described using the front panel operation buttons.The following are

8OPERATING THE DVI TO RGBS WITH SCALERCOLORPress the MENU button to select the COLOR option. There are several sub-options that are available for adju

9OPERATING THE DVI TO RGBS WITH SCALEROSDPress the MENU button to select the OSD option. There are several sub-categories that are available for adjus

10OUTPUT SIGNAL CONFIGURATIONHOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNALThere is a bank of 2 dip switches on the underside of the DVI t

11SPECIFICATIONSVideo Amplifi er Bandwidth ...165 MHz Input Video Signal ...

12WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

20600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefen.com [email protected] A56.01

ASKING FOR ASSISTANCETechnical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM Monda

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout5 Panel Descriptions6 Connecting And Operating The DVI To RGBS With Scaler7 Operating

1INTRODUCTIONCongratulations on your purchase of the DVI to RGBS with Scaler. Your complete satisfaction is very important to us.The Gefen DVI to RGBS

READ THESE NOTES BEFORE INSTALLING OROPERATING THE DVI TO RGBS WITH SCALER• Output signal types are not confi gured through the on-screen GUI. To confi

3FEATURESFeatures• Connects computers with DVI-D/DVI-I connectors to analog RGBS monitors or projectors • The output is either in the form of RGB, R

4PANEL LAYOUTFront PanelBack Panel176 82 3 45

5PANEL DESCRIPTIONS1 IR ReceiverThis receiver will receive commands from an optional RMT-SR-IR remote control. This receiver requires line-of-sight to

6How to Connect the DVI to RGBS with Scaler1. Connect the DVI source to the DVI to RGBS with Scaler using the supplied DVI cable.NOTE: A VGA source m