Gefen 8x8 DVI Dual Link Matrix Uživatelský manuál

8x8 DVIDual Link MatrixGEF-DVI-848DL-PBUser Manualwww.gefenpro.com

6PANEL LAYOUTBack Panel37861452

7PANEL DESCRIPTIONSBack Panel1 110 / 220 V AC (50/60 Hz) Power ReceptacleConnect the included AC power cord from this receptacle to an availableelect

8CONNECTING THE 8X8 DVI DUAL LINK MATRIXHow to Connect the 8x8 DVI Dual Link Matrix1.Connect up to 8 DVI Dual Link source devices to the inputs on the

9FRONT PANEL DISPLAYMain DisplayThe Main Display of the GefenPRO 8x8 DVI Dual Link Matrix is a 16 character 2 line display. This display will show the

10FRONT PANEL DISPLAYDisplaying the Routing StatusFrom the main screen, press the Select button. When the arrow cursor is next to OUTPUT, pressing th

11IR REMOTE CONTROL UNITLayout and Description (RMT-848IR)1 LED Button Press IndicatorThis LED will be activated momentarily each time a button is pre

12Installing the Battery1.Remove the battery cover on the back of the IR Remote Control unit.2. Insert the included battery into the open battery slot

13IR REMOTE CONTROL UNITSetting the IR ChannelIn the event that IR commands from other remote controls interfere with the supplied IR Remote Control u

14IR REMOTE CONTROL UNITIR Remote Control Key MappingEach input and output on the 8x8 DVI Dual Link Matrix is represented by a button on the IR Remote

15EDID MANAGEMENTEDID. What is it and what is it used for?Under normal circumstances, a source device (digital and analog) will requireinformation abo

16IP CONFIGURATIONConfi guring the IP AddressThe8x8 DVI DL Matrix supports IP-based control using Telnet or the built-in xWeb-based GUI. To set up IP

17RS-232 SERIAL CONTROLRS232 SettingsBits per second ...

18TELNET / RS-232 COMMANDSEDID ManagementCommandDescription#dynamic_edidEnables / disables dynamic EDID#edidbatoloRead downstream EDID and stores in a

19TELNET / RS-232 COMMANDS#edidbatolo CommandThe #edidbatolo command reads the downstream EDID and stores it to any local input. Up to eight inputs c

20TELNET / RS-232 COMMANDS#ediddetolo FunctionThe #ediddetolo function stores the Default EDID (640x480) in the specifi edLocal EDID inputs. Up to eig

21TELNET / RS-232 COMMANDS#ediddstoba FunctionThe #ediddstoba function reads the downstream EDID and stores it to a specifi edEDID bank.Syntaxy:#edidds

22TELNET / RS-232 COMMANDS#ediddstolo FunctionThe #ediddstolofunction reads the downstream EDID and stores it to a Local EDID input.Syntaxy:#ediddstol

23TELNET / RS-232 COMMANDS#lock_edid FunctionThe #lock_edid function secures the Local EDID and disables the automaticloading of the downstream EDID a

24TELNET / RS-232 COMMANDS#prbaedid FunctionThe #prbaedid function reads the EDID fi le from the specifi ed bank and sends to serial port.Syntaxy:#prbae

25TELNET / RS-232 COMMANDS#prdsedid FunctionThe #prdsedid function reads the downstream EDID and sends it to the serial port.Syntaxy:#prdsedid param1P

ASKING FOR ASSISTANCERev A9Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM - 5:00 PM

26TELNET / RS-232 COMMANDS#predidst FunctionThe #predidst function reads the downstream EDID. This function displays atable containing details relati

27TELNET / RS-232 COMMANDS#prloedid FunctionThe #prloedid function reads the local EDID of a specifi ed input and spools it to the serial port.Syntaxy:

28TELNET / RS-232 COMMANDSIP / Telnet Confi gurationCommandDescription#display_telnet_welcomeSet Telnet welcome message on login#ipconfi g Displays all

29TELNET / RS-232 COMMANDS#ipconfi g CommandThe #ipconfi g command displays the current TCP/IP settings for the matrix.Syntaxy:#ipconfi gParameters:NoneE

30TELNET / RS-232 COMMANDS#resetip CommandThe #resetip command resets all TCP/IP settings to factory defaults.Syntaxy:#resetipParameters:None Notes:T

31TELNET / RS-232 COMMANDS#set_telnet_pass CommandThe #set_telnet_pass command sets the Telnet password. The maximum lengthof the password is 20 char

32TELNET / RS-232 COMMANDS#set_telnet_username CommandThe #set_telnet_username command sets the Telnet user name. The maximum length of the user name

33TELNET / RS-232 COMMANDS#show_telnet_pass CommandThe #show_telnet_pass command shows the Telnet password for login(if required).Syntaxy:#show_telnet

34TELNET / RS-232 COMMANDS#show_ver_data CommandThe #show_ver_data command displays the hardware and fi rmware version of the matrix.Syntaxy:#show_ver_

35TELNET / RS-232 COMMANDS#snetmask CommandThe #snetmask command sets the IP network mask. Dot-decimal notation must be used when specifying the IP n

CONTENTS1 Introduction2 Operation Notes3 Features4 Panel Layout - Front5 Panel Descriptions6 Panel Layout - Back7 Panel Descriptions8 Connecting A

36TELNET / RS-232 COMMANDSRoutingCommandDescription#callpresetRecalls a routing / mask preset#prpresetPrints the routing preset table#savepresetSaves

37TELNET / RS-232 COMMANDS#prpreset CommandThe #prpreset command displays the routing preset table.Syntaxy:#prpresetParameters:NoneExamplep:#prpresetP

38TELNET / RS-232 COMMANDS#savepreset CommandThe #savepreset command saves the current routing state to the specifi edpreset. Any masked outputs will

39TELNET / RS-232 COMMANDSr CommandThe r command routes the specifi ed input to the specifi ed outputs. Syntaxy:r param1 param2 [param3...param9]Paramet

40TELNET / RS-232 COMMANDSs CommandThe s command routes the specifi ed input to all outputs.Syntaxy:s param1Parameters:param1 Input [1 - 8]Example

41TELNET / RS-232 COMMANDSMaskingCommandDescription#maskoutMasks the selected (video) output(s)#unmaskoutUnmasks the selected output(s)#maskout Comman

42TELNET / RS-232 COMMANDS#unmaskout CommandThe #unmaskout command unmasks the specifi ed outputs. If param1 = 0, then all outputs will be unmasked.Sy

43TELNET / RS-232 COMMANDSMiscellaneousCommandDescription#activeboloActivates the boot loader#fadefaultResets the matrix to factory default routing#he

44TELNET / RS-232 COMMANDS#fadefault CommandThe #fadefault command disables the EDID lock state, sets the default routingstate (1-1, 2-2, 3-3, etc.) a

45TELNET / RS-232 COMMANDS#help CommandThe #help command displays help on the specifi ed command. If param1 is notspecifi ed, then the full list of com

1INTRODUCTIONCongratulations on your purchase of the GefenPRO 8x8 DVI Dual Link Matrix.Your complete satisfaction is very important to us.GefenPROIn t

46TELNET / RS-232 COMMANDS#set_input_name CommandThe #set_input_name command provides a name to the selected input.For example, “Input 1” could be ren

47TELNET / RS-232 COMMANDS#set_output_name CommandThe #set_output_name command provides a name to the selected output. For example, “Output 1” could

48TELNET / RS-232 COMMANDS#show_voltageThe #show_voltage command provides voltage information for the matrix.Syntaxy:#show_voltageParameters:NoneExamp

49TELNET / RS-232 COMMANDSf CommandEnables / disables 5V on pin 14 of the specifi ed DVI input. This command isused when connecting the Receiver modul

50TELNET / RS-232 COMMANDSl CommandThe l (lower-case “L”) command displays the link status of each input. If the input is receiving a dual-link signa

51TELNET / RS-232 COMMANDSm CommandThe m command displays the current matrix status and routing information.Syntaxy:mParameters:NoneExamplep:m Output

52WEB INTERFACEView Matrix StatusMatrix StatusDisplays the current routing status of each input and output on the matrix.RefreshClick to refresh the M

53WEB INTERFACESwitch OutputsUsed to route the specifi ed input to the selected output(s). To route a source,place a check mark next to each Output.

54WEB INTERFACEPresetthe down-arrow on theown list to select the preseton (1-16). Click the Save et button to save the preset.Recall PresetClick the

55WEB INTERFACESave Output NameSelect the DVI output to rename from the pull-down list. Type the name of the output in the Output Name fi eld. Click

OPERATION NOTES2READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFENPRO 8X8 DVI DUAL LINK MATRIX• The 8x8 DVI Dual Link Matrix does not support HD

56WEB INTERFACEManage EDIDSet Input to Default EDIDEDID StatusDisplays the current EDID status for each input on the matrix andindicates the current L

57WEB INTERFACESet Default EDIDPlace a check mark next to the input(s) that should be set to the default EDID.Click the Set Default EDID button to app

58WEB INTERFACEUpload EDIDLoad EDID fi lePlace a check mark next to the input(s) that will receive the EDID data from thefi le. The EDID fi le must be i

59WEB INTERFACEDownload EDIDDownload EDID File to PCSelect the radio button next to the output, containing the EDID to be downloaded. Click the Downl

60WEB INTERFACECopy EDIDSelect Source to Copy from / Select Input(s) to Copy toClick the radio button next to the input or output containing the EDID

61WEB INTERFACEEDID Lock StateUpdate EDID Lock StateSecures the Local EDID and disables the automatic loadingof the downstream EDID after the Matrix i

62WEB INTERFACEMaskingMatrix Mask Status / ChangeDisplays the current masking status for each output.MaskClick the Mask button to mask the selected ou

63WEB INTERFACEIP Confi gurationIP SettingsAssigns IP address, subnet, gateway, HTTP listening port, and Telnet port.Note that the MAC address can not

64WEB INTERFACEBackup / RestoreThe Backup / Restore feature for the 8x8 DVI Dual Link Matrix is not currently implemented and will be available in a f

65WEB INTERFACEPower ManagementPower StatusEnabling this feature will store the +5V status for that input prior to shutting downthe matrix. This pres

3FEATURESFeatures• Increases productivity•Supports resolutions up to 1920x1200 (Single Link) and 3840x2400 (Dual Link)• Front panel control buttons f

66WEB INTERFACEPower Lock StateIn the case of an accidental power loss to the matrix, the +5V state for eachinput can be preserved.Set the specifi ed P

67NETWORK CABLE WIRING DIAGRAMGefen recommends the TIA/EIA-568-B wiring option. Please adhere to the table below when fi eld-terminating the cable for

68FIRMWARE UPDATEFirmware Update ProcedureThe following items are required to update fi rmware:•RS-232 Terminal (e.g. Windows-based PC running HyperTer

69FIRMWARE UPDATE8. A message will appear in the terminal program:Waiting for the fi le to be sent ... (press ‘a’ to abort)9. In Hyperterminal, click T

70RACK MOUNT SAFETY INFORMATIONa.Maximum recommended ambient temperature: 45 ˚C (104 ˚F).b.Increase the air fl ow as needed to maintain the recommended

71SPECIFICATIONSVideo Amplifi er Bandwidth ...2 x 165 MHzDVI Connector ...

72WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

73LICENSINGlwIP is licenced under the BSD licence:Copyright (c) 2001-2004 Swedish Institute of Computer Science.All rights reserved.Redistribution and

Rev A920600 Nordhoff St., Chatsworth CA 913111-800-545-6900 818-772-9100 fax: 818-772-9120www.gefenpro.com [email protected]

4PANEL LAYOUTFront Panel234516

5PANEL DESCRIPTIONSFront Panel1 Control ButtonsThese buttons are used to navigate the LCD menu system. See pages 9 and 10 for more information.◄ -